Irrigation

The main features to take care of your garden, wherever you are.

To access the Irrigation System, simply tap the three dots in the upper right corner, then select the Irrigation button.

The Basics

Managing irrigation is a bit like listening to music, the main controls are as follows:

• Start: press the green button with the sprinkler symbol to start the irrigation cycle.

• Pause: Did you forget to move something off the lawn? Temporarily pause the cycle by pressing the blue button. Pressing the Start button again will resume the cycle from where it was paused.

• Stop: using the red button, you can completely stop the cycle. By pressing the Start button again, the cycle will restart from the beginning.

• Back / Forward: these two buttons allow you to go back to the previous stage or move to the next one.

We talked about the irrigation cycle, as it's essential to divide the garden into zones to ensure adequate system pressure, thus ensuring a correct water supply. Each zone corresponds to a specific phase of the cycle.

In addition to the main buttons, these are the elements you will find on the page:

• Weather Forecasts: useful if you're away from home to avoid watering when it rains.

• Rain Gauge: If you have installed a rain sensor, you can check the condition of your lawn; the system will automatically avoid initiating the irrigation cycle if the garden is sufficiently moist.

• Irrigation Cycle Information: here you can find a summary of what is happening; if the cycle is in progress, the percentage of completion, and which phase (zone) is being irrigated at that moment.

• Zones / Phases: Below are the zones/phases that have been configured, which you can modify in terms of time, order, and name.

You can link irrigation to weather conditions to automatically skip the cycle if rain is forecasted; contact your technician to activate this option.

Remember, since these are forecasts, they cannot match the performance of a rain sensor.

Zones / Phases

When we talk about zones or phases, we're essentially referring to the same thing. Each garden zone is associated with a specific phase of the irrigation cycle. You can manage the system by adjusting these phases.

The box representing the zone (or phase) is characterized by:

• Play Button: if you want to water a specific zone, you can press the play button and choose whether to start only that phase or include the following ones.

• Name: the name helps you distinguish between the phases and you can modify it as you wish.

• Duration: the phase duration is expressed in minutes, and you can change it by tapping directly on the value.

• Completion Percentage: this percentage value indicates the progress of the specific phase.

Modifying the Configuration

To modify the phase configuration, press the three dots in the upper right corner, then select Edit Configuration.

Here are the actions you can take:

• Reorder Phases: to reorder the phases, simply press and hold the phase you want to move, then drag it to your desired location.

• Modify Name: click directly on the text to edit the name.

• Modify Duration: click directly on the value to edit the duration.

Once you've completed your modifications, press the three dots in the upper right corner again, then Close Edit (press Cancel if you want to discard the changes).

Calendar

Ideally, you'll schedule an automatic execution of the irrigation cycle, reserving manual start or stop for isolated cases.

To configure the schedule, press the three dots in the upper right corner, then select Calendar.

Once you've opened the calendar page, press the three dots in the upper right corner, where you can:

• New Event: tap this option to create a new event.

• Activate All: press this button to activate all the configured events.

• Deactivate All: press this button to deactivate all the configured events.

Creating an Event

Creating an event is quite simple and allows you to set a name for the event (e.g., Evening Irrigation), define the start time for the cycle, and choose the days of the week when you want to activate this configuration.

If you want to water more than once a day, you will need to create an equivalent number of events.

To modify an existing event, simply tap on it.